Skip to product information
  
  
    
    
    
    
      
        
      
  
  
  
  
  
  
    
    
    
      
    
      
      
      
      
      
  
  
   
  
  
      
 
    
      
      
      
      
      
    
  
     
   
  
      
      
  
  
  
      
  
  
 
    
 
  
    
      
      
    
      
    
      
        
      
  
  
    
    
  
  
    
    
    
    
  
  
  
  
    
   
  
  
     
  
    
      
    
  
  
 
  
  
Range Rover Emulator - Discovery 4 5 Emulator - Evoque - Vogue - Sport Steering Lock Emulator
  
  
    $169.00
  
  
  
Compatible Models: LAND-ROVER RANGE ROVER 2010 – 2020 Discovery 4-5 / Evoque / Vogue / Sport Models
- ESCL/ELV Is A Self-occurring Mechanical Failure In The Steering Column Lock.
- The Occurrence Of The Fault Does Not Depend On Any Fault.
- In Case Of Malfunction, Even If There Is No Problem In The Vehicle Key, The Working Key Will Not Start this is because The ELV Steering Column Lock is out of alignment and can not be activated.
- In This Case, A New ELV Steering Column Lock Must Be Installed In The Vehicle And Programmed Into The Vehicle.
- A genuine module replacement will cost thousands or a programmed emulator module will do away with the old device.
Common signs might be:
- The remote still locks/unlocks your vehicle but wont start
- Dash Lights don't come on when pushing start button/No Key Detected or steering wheel fault comes up on dash.
 
- The steering wheel is in the unlocked position when the car is off
Range Rover Emulator - Discovery 4 5 Emulator - Evoque Emulator - Vogue Emulator - Overview
New Plug and Play steering Wheel Column Lock Simulator Emulator For Range Rover Discovery Evoque Vogue Sport Models.
UNIVERSAL ESL/ELV/SCL Steering Lock Emulator.
Range Rover Emulator - Discovery 4 5 Emulator - Evoque Emulator - Vogue Emulator -Compatibility & Fitments
LAND-ROVER RANGE ROVER 2010 – 2020 Discovery 4-5 / Evoque / Vogue / Sport Models.
Range Rover Emulator - Discovery 4 5 Emulator - Evoque Emulator - Vogue Emulator -Step by Step Installation:
- Switch OFF The CAR
- Remove the steering wheel plastic surround covers
- Remove & Unplug the defective SCL cable
- Plug the cable in the Replacement Emulator
- Switch ON the car (The engine should start now)
- Clear stored fault codes diagnostically
